Full Dip Top Coats

Full dip top coats available in: Glossifier Aerosol and 4 litre tin ( easy to use glossy removable finish). Matte clear aerosol and 4 litre tin( easy to use Matte removable finish).
High Gloss & Matte Top Coat in Aerosol and 3.25 litre 2K kit ( scratch and fuel resistant )

Full Dip Glossifier

Available in Aerosol and 4 litre sprayable. Easy to spray with glossy finish.
Perfect & easy application for beginners using aerosol can or electric spray gun Full Dip FD650, also works Excellent in compressor spray gun setup. Full dip Glossifier is not fuel or chemical resistant just like plasti dip glossifier. It is easy to apply and can be applied 20 minutes after last coat of your full dip.

High Gloss Top Coat

Available in Aerosol and 3.25 litre sprayable kit
The full dip High Gloss is Fuel, chemical and scratch resistant.
You should get gloss finish nearly as good as original car manufacturer finish if applied correctly.

You can flatten and polish the high gloss (high gloss only).The 3.25 litre sprayable kit Can be used in electric and compressor spray gun setup.
Not for beginners to use. Not easy to spray and easy to get runs.
It will work with electric guns but more likely to get orange peel effects introduced to finish.

This is a 2k high gloss top coat and requires measuring accurately and mixing correctly.
Applied correctly with a good spray gun you will get amazing ,tough gloss finish to your full dip.

Matte Clear Top Coat

Not for beginners to use. Not easy to spray and easy to get runs.
Easier to apply than the high gloss.
This also is a 2k Matte top coat and requires measuring accurately and mixing correctly.

The Full dip super high gloss available in 400 ml Aerosol can.
Designed to add a high bright shine to the matte finish of Full Dip products.
Fuel and Scratch resistant.We consider this as a semi-permanent gloss that can be peeled, but it is harder to remove, especially over plastics.

Super Gloss / High Gloss / Matte application

The super gloss,high gloss and matte 2k top coats need to be applied correctly or you will have problems.
Must have at least 6/7 coats of full dip on your project. Full dip to be let dry for 24 hours before applying any of the acrylic or 2k top coats.