Full Dip Yellow Fluorescent Aerosol Spray
Full Dip Yellow Fluorescent.
The full dip neon liquid vinyl is amazing. The neon or fluorescent colours are becoming more popular.At first some trim or wheels.Now cars and motorbikes have been fully dipped in fluorescent. Go full on with full dip glossifier or high gloss top coat for a spectacular Gloss finish.
The neon colours are characterised by extra strong colour intensity, so For full effect make sure you apply over a white base colour before you spray any Fluorescent colour.
Full Dip Fluorescents
Wraps, protects and changes colour with matte finish. It can be removed by peeling it, as if it were a conventional vinyl.
change the colour of your Car, motorbike, alloy wheels, badges, emblems, grilles and interior Trim.
Use around the Home or Garden, arts & crafts. You can full dip almost anything.
Our Full Dip aerosols include two nozzles, each designed for a function: standard nozzle flow and high-flow nozzle for larger areas. Simply swap them to get the fan size you want, wide and wider.
Full Dip fluorescent range
Apply over a white base colour for best results before you spray any Fluorescent colour.
Will wrap, protect and change the colour of your project with a metallic finish. You can add glossifier or high gloss as a top coat for desired effects.
It can be removed by peeling it, as if it were a conventional vinyl.
Long research and development process from pioneers in the liquid vinyl spray for quality products.
Auto Levelling Additives for that perfect smooth finish.
Long lasting, still removable after 10 years.
Full Dip 400ml spray covers up to 1.2 meters sq.
Air dried, flexible, liquid coating for use on almost anything
Liquid Vinyl spray application, once dry becomes a tough elastic and durable film.
It can be easily removed from most surfaces if required,Plastic,glass and metal.
You will need an average of 4-6 coats. Add more layers for greater protection. Sprayable Liquid Wrap in a Can.
You can clean Full dip with most soaps, and it will resist water, mud or pressure water cleaning.
No cracks or self peeling over time, remains flexible and stretchy, and will not become brittle or crack.
1. SURFACE PREPARATION
Before you start spraying the liquid vinyl, you need to have the surface completely clean, dry and free of any substance that may be capable of causing non grip (as waxes, cleaners etc). It is advisable to ensure that the surface is clean as possible without dirt (such as sand , dust, road tar, brake dust etc.) Full Dip® will bond to the surface you spray it on, and thus, if the surface is not 100% clean, you will get imperfections and faults.
So it is important you clean properly (even those annoying parts and between spokes on wheels). Cleaned perfectly and you will get uniform even finish that lasts years.
1 TOLERANCE TEST
Full Dip® can be applied to any surface such as metals, plastics, glass, wood, etc.. However it may best to do a small pre-test on an insignificant part of your project before committing to the full project to make sure it is 100% compatible to what you are spraying over with no adverse reaction.
2. APPLICATION OF Full Dip® Fluorescent
Shake vigorously before use. At least a minute to mix all the internal elements.
Apply the product approx. 20 cm range. Always parallel to the surface you are spraying. You can apply as many coats as you want, keeping in mind that you will need an average of 4-6 coats. But remember, that more coats you apply, the more durable it will be. The result will be better and more easily peeled if you want to remove in the future. Use less coats, two or three, then expect problems like hard to remove,poor finish and durability. Between coats, you must wait at minimum 10-30 minutes. Full dip will be touch dry in 10-30 minutes, but to be completely dry you need wait 12 hours. We recommend 100% using a proper PPE mask during application. Once dried / cured, your project is ready to use.
Full dip yellow fluorescent – Shake Spray Be Amazed
Instructions for spraying aerosols or applying fluorescent colours please go to our How To Guide
All Fluorescent Colours Fade
After a couple of months outside in the sunlight all fluorescent colours will start to fade.
With Full dip Fluorescents you can fix by cleaning the surface of the fluorescent paint and applying
an extra coat and it will look new again.
This is an easy fix for small projects like car & motorbike wheels. I would not do a whole car or motorbike in fluorescent for this reason.
Having said that, a lot of people spray racing cars & bikes for track days. It looks cool, easy to add more or remove.